SCRAMBLER CONTROL ARMS
THE WELD BROKE ON MY CONTROL ARM YESTERDAY. AFTER INSPECTING IT I NOTICED IT WAS A COLD WELD WITH ZERO PENETRATION (NOT VERY HAPPY ABOUT THAT) MY QUESTION IS...... ITS AN 05 CAN I PUT ANY YEAR CONTROL ARM ON THE MACHINE. IM NOT TO CONCERNED WITH THE COLOR SEEING THAT I AM GOING TO REWELD ALL THREE CORNERS. BUT I HAVE SEEN SOME WITH GREESE FITTINGS ON EBAY AND I AM WONDERING WILL THESE FIT MY MACHINE.
|
SCRAMBLER CONTROL ARMS
most scrambler parts are interchangable
|
SCRAMBLER CONTROL ARMS
I have gone through a couple a-arms myself racing hare scrambles. I would suggest getting some a-arm guards, they greatly improve the strength for the scramblers set up I have yet to bend or break any since adding the guards.
as far as to what year on the arms and with or with out out the zerks. I would recomend getting some with the zerks. I believe the years without the zerks the seals on the ends werent that great. The new models 07 etc went back to using zerks on the arms. |
SCRAMBLER CONTROL ARMS
thanks for the info rundrave. i did have a set of a arm guards on it from moose (pretty heavy duety) but like i said the weld broke at a spot where if it was welded propely it should not have broke. i won't act like i ride the machine easy but this weld broke clean due to lack of heat!
|
SCRAMBLER CONTROL ARMS
EPI has them on clearance at the moment.
|
All times are GMT -5. The time now is 05:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands