Swing arm is loose
#1
#4
#5
Swing arm is loose
I took apart the chain side....bolt was loose...I tighten it at least 1 and half turns...my swing arm is tight now
I put back the old bearings to see how things are and my sprocket hub is rubbing against the hitch where the chain had made a groove...and i'm to grind down the groove flush and pick up new bearings tomorrow.
I still have some play on the rear axle..so i'm thinking the new bearings will help with that!
thanks for the reply guys
Sbishop
I put back the old bearings to see how things are and my sprocket hub is rubbing against the hitch where the chain had made a groove...and i'm to grind down the groove flush and pick up new bearings tomorrow.
I still have some play on the rear axle..so i'm thinking the new bearings will help with that!
thanks for the reply guys
Sbishop
Thread
Thread Starter
Forum
Replies
Last Post
MeadowlarkFarm
Test Your Signatures (sigs) Here!
3
11-27-2019 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)