anybody know what other models will fit the front ive only found 1 on ebay its like 130 would like to find a used 1 thanks alot!

 

if you know how to weld ,easy mods ,made a honda fit mine

 

go to the gen3usa.com its a great polaris site, look in the parts section. theres one in there for sale 40 bucks plus shipping brand new

 

thanks itch waiting for admin to accept my application thanks alot!

 

The 2000 Boss is a gen II.

The gen 3 isn't a straight bolt on for it. It could be made to fit.

Ebay is the best place to look.

 

ok thanks for the replies. do any other polaris quads use the same rack? ive looked on ebay some look like they fit ive looked on bike and it looks like the front portion will bolt up 3 ways. anybody know?

 

You might check with CMP to see if they make one for it.

 

IS IT A GEN2 OR GEN3 IVE BEEN TOLD BOTH? SCOOTER WHAT WOULD I HAVE TO DO TO MAKE IT FIT? IT LOOKS LIKE THERE IS 3 DIFFERENT WAYS TO BOLT IT UP ON THE FRONT BUMPER 1 GOES INSIDE FRONT BUMPER 1 GOES IN FRONT AND 1 I THINK GOES ON FRONT BUMPER RAIL ALTHOUGH THERE IS PLASTIC COVERING THE TOP THERE IS HOLE ON BOTTOM AND I THINK IT COULD BE DRILLED THANKS FOR THE HELP

 

oops sorry i forgot caps on duh

 

I have a 2000 Trail Boss, which is a gen II, and a 2003 Trail Blazer, which is a gen 3.

I think you'd have better luck trying a rack from a 250 Trail Boss. (98 and earlier)

I had taken the front rack off the Blazer the 1st week I bought it. Had a little accident and it hit my chin. Yeah, not a normal ride that day. So to keep that from happening I took it off. Been sitting in my shed ever since.

I won't be able to look at both of them until tomorrow. Got a event to go to tonight.

I know it's different, but it may not be so much that it wouldn't work. If you don't have an answer from someone by tomorrow evening, I'll definitely let you know.