Polaris Discussions about Polaris ATVs.

01 250 trailblazer will not start

Thread Tools
 
Search this Thread
 
Old May 31, 2008 | 06:53 PM
  #31  
samk's Avatar
Range Rover
Joined: Jun 2007
Posts: 101
Likes: 0
Default 01 250 trailblazer will not start

That's too funny,,, my dad's trailblazer has shot rear bearings and I'll be replacing them soon. I just got the bearings & seals today. I ordered a manual but it hasn't arrived yet. I'll try to PM you some tips when I get around to doing his. What year is your other bike?
 
Reply
Old May 31, 2008 | 06:55 PM
  #32  
trailblazermudrunner's Avatar
Joined: Apr 2004
Posts: 1,156
Likes: 0
From: Central Kentucky
Default 01 250 trailblazer will not start

okie hey o6 scrambler i just repllyed to ur other post ill give u some tips on there
 
Reply
Old Jun 1, 2008 | 02:18 AM
  #33  
06 scrambler's Avatar
Thread Starter
|
Range Rover
Joined: May 2008
Posts: 106
Likes: 0
Default 01 250 trailblazer will not start

cool thanks runner......samk its a 06 scrambler 500. the trailblazer is my wifes. i beleave that the rearends are the same so pls let me know what you find out and how to do it...thanks
 
Reply
Old Aug 21, 2016 | 03:26 AM
  #34  
Adrian963's Avatar
Weekend Warrior
Joined: Aug 2016
Posts: 10
Likes: 0
Default Trail blazer won't start

If my choke cable is broken can that also prevent my Polaris from starting?
 
Reply
Old Aug 21, 2016 | 03:32 AM
  #35  
Adrian963's Avatar
Weekend Warrior
Joined: Aug 2016
Posts: 10
Likes: 0
Default Trail blazer won't start

If my choke cable is broken can that also prevent my Polaris from starting?
 
Reply
Old Aug 21, 2016 | 09:41 AM
  #36  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

Originally Posted by Adrian963
If my choke cable is broken can that also prevent my Polaris from starting?
Yes it can especially on cold starts as well as other things can keep one from cranking. Most important thing on any two stroke is to have good compression,a good fuel supply and good spark.
 
Reply
Old Aug 22, 2016 | 12:22 AM
  #37  
Adrian963's Avatar
Weekend Warrior
Joined: Aug 2016
Posts: 10
Likes: 0
Default

And I also did a compression test and it came out to 90 psi is that good? ohh and also that's with the carburetor off will that effect the psi?
 
Reply
Old Aug 22, 2016 | 06:55 AM
  #38  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

Carb on or off doesn't matter.. 90 psi is too low.. Some may start at this compression,some may start after several attempts,some may even run good until they get hot,then bog or die. Then won't crank back up until cold again. Time at least for a new fresh top end.
 
Reply
Old Aug 23, 2016 | 12:24 AM
  #39  
Adrian963's Avatar
Weekend Warrior
Joined: Aug 2016
Posts: 10
Likes: 0
Default Polaris won't start

So I took the top end off and the piston looked really beat

And also the cylinder wall has like a bunch of grooves on the wall so would it be best to the piston and the cylinder or what .......?
 
Reply
Old Aug 23, 2016 | 12:34 AM
  #40  
Adrian963's Avatar
Weekend Warrior
Joined: Aug 2016
Posts: 10
Likes: 0
Default 250 trailblazer won't start

Ohh and also which piston would you recommend for me to buy so I won't have this problem anymore?
 
Reply



All times are GMT -5. The time now is 07:28 PM.