Proper Welding to fix Glacier2 Plow mount

If you opt for the Glacier2, keep the above handy just in case you need it. (Click on the photos in the post)

 

<div class="FTQUOTE"><begin quote>Originally posted by: so2315

I have a 2007 800 X2. I have the Polaris brush guard on and I also have a Jamguard radiator bracket that is straight across on the bottom, it doesn't have the opening for clearance to the tow hook.

What kind of plows do not use the tow hook on the front? I have also heard of the Polaris brush guard being in the way of the winch cable (I do not have a winch on it yet). Plows are totally new to me, but I am leaning towards the Moose Country. Any advice?</end quote></div>

i have a moose i got for 200$ at the shop i bought my quad from..and they just traded my cycle country mount for a moose mount... there is a hook that your winch hook clips too... my winch is mounted out unlike the newer polaris's so im not sure how that would work.. i know when i used my buddys cycle country i had to wrap my winch around the tubing because there was no hook...

 

My Moose 60" RMS County Plow easily connects and disconnects. The winch cable clears the brush guard. I am, however, unable to turn the plow either direction all the way, for the blade then hits the brush guard when raised.