Pulling the flywheel

Reply Subscribe

Thread Tools

Search this Thread

Jan 19, 2009 | 07:01 PM

JCasper

Thread Starter

Weekend Warrior

Joined: Jan 2009

Posts: 16

Likes: 0

Pulling the flywheel

I need to pull the flywheel on my 500ATP tonight.

I was hoping to not buy a ton of bolts to get the right ones. I need to know the size/pitch of the 3 holes around the center of the flywheel.

TIA, Joe

Jan 19, 2009 | 07:47 PM

94harley

Pro Rider

Joined: Oct 2007

Posts: 830

Likes: 0

From: Colorado

Pulling the flywheel

i would say it is probably a 8 x 1.25 for your atp.
The older flywheels used a 6 x 1.0

Jan 19, 2009 | 07:59 PM

JCasper

Thread Starter

Weekend Warrior

Joined: Jan 2009

Posts: 16

Likes: 0

Pulling the flywheel

Thanks

Jan 20, 2009 | 02:21 AM

JCasper

Thread Starter

Weekend Warrior

Joined: Jan 2009

Posts: 16

Likes: 0

Pulling the flywheel

8 x 1.25 it is. Thanks for that

Now another question. I have the nut off the center and I attatched the puller to the flywheel, but it is on there tight.

How hard should it be to come off, am I missing something or does it take quite a bit of force?