Can"t keep chain tight
#1
Can"t keep chain tight
I've got a 06 trail boss 330 and I can't get the chain to stay tight. I adjust it as said to by the manual loosen the two bolts on the rear end but punch throught the hole and roll the atv to tighten the chain then tighten the two bolts. I can go riding for a few hours put by the time I get back the chain is laying on the swingarm i'm talking sloopy loose. Cloud someone please give me some ideas on what to do to keep my chain tight.
#2
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
#5
Can"t keep chain tight
<div class="FTQUOTE"><begin quote>Originally posted by: hypergt
I've got a 06 trail boss 330 and I can't get the chain to stay tight. I adjust it as said to by the manual loosen the two bolts on the rear end but punch throught the hole and roll the atv to tighten the chain then tighten the two bolts. I can go riding for a few hours put by the time I get back the chain is laying on the swingarm i'm talking sloopy loose. Cloud someone please give me some ideas on what to do to keep my chain tight.</end quote></div>
06 kinda early for chain to be worn out,but if chain has excessive side to side play on chain links(when chain is loose) then possible. Tighten chain to 3/8- 1/2" play in middle of chain between sprockets then TIGHTEN axle bolts to about 50 foot pounds! manual will give exact torque specs. When I adjust chain I just impact TIGHT! After adjustment jack up and turn wheel,if chain varies in tightness,tight,loose,then tight again,then chain worn.
I've got a 06 trail boss 330 and I can't get the chain to stay tight. I adjust it as said to by the manual loosen the two bolts on the rear end but punch throught the hole and roll the atv to tighten the chain then tighten the two bolts. I can go riding for a few hours put by the time I get back the chain is laying on the swingarm i'm talking sloopy loose. Cloud someone please give me some ideas on what to do to keep my chain tight.</end quote></div>
06 kinda early for chain to be worn out,but if chain has excessive side to side play on chain links(when chain is loose) then possible. Tighten chain to 3/8- 1/2" play in middle of chain between sprockets then TIGHTEN axle bolts to about 50 foot pounds! manual will give exact torque specs. When I adjust chain I just impact TIGHT! After adjustment jack up and turn wheel,if chain varies in tightness,tight,loose,then tight again,then chain worn.
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)