ATVConnection.com ATV Enthusiast Community

ATVConnection.com ATV Enthusiast Community (https://atvconnection.com/forums/)
-   Polaris (https://atvconnection.com/forums/polaris/)
-   -   96 Sportsman 500 Rear CV swap (https://atvconnection.com/forums/polaris/311312-96-sportsman-500-rear-cv-swap.html)

shspvr 04-18-2009 08:12 AM

96 Sportsman 500 Rear CV swap
 
Dose any know or has done the old Rear half shaft U-Joint stye from 96/98 can be swap over to newer full CV half shaft why I ask it would be a better way to go and eazy to get parts and I can't find and any Rear half shaft U-Joint stye to replace the bad one I have which get bent due to cap that come out.

stendori 04-19-2009 06:03 AM

you could always just messure the lenth of your old set up and then go compare to the newer ones and as long as the spine is the same(betting it is)and the overall length i would think it would be fine. just a guess though.

TLC 04-19-2009 10:56 AM

Here is a copy paste from a another site.


i have a 96 500 and i will tell you they are very weak hense the reason they were discontinued, they were only in the 500 for 2 years 96 and some 97s and the 335s i had both, they will not last and i seem to be the only one who has upgraded these it takes some money and work, must replace with cv of your choice, and the outer hub has to be changed the the newer style for the cv to go through, also there is major clearance issue with the cv by the trans and the where the a arms bolt up nothing a hammer and grinder wont fix, i did this last summer after hundreds spent replacing the old ujoints over and over, not to mention try and find replacement parts when something other than the u joint bust, takes forever even on ebay and is extremely high i promise just switch over and save time and money, nothing has broken with 27s and two in lift in very hard riding since
souce.Reliability of u joint axles

shspvr 04-20-2009 09:07 AM

Thanks TLC

teamplayer 04-20-2009 01:43 PM

I just did this swap on my '98 this past winter. If you have any questions I will be sure to help you.


All times are GMT -5. The time now is 11:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands