2000 Sportsman 500 RSE Speedometer Resolder
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Below, Daviemun talks about resoldering the transistor. Does anyone have any more information about this? Some more input on this would be great! Pics if possible would be even better! Thanks!
I had a similar problem. Was the voltage regulator next to the grill. I replaced that and the bulbs. The AWD won't work because the speedo is fried. You can take it apart and resolder the transistor to the PCB inside. I took the capacitor off next to it so I could get to it and then resoldered it back on. Works fine now. You will notice that the caps runs on the PCB are on one side and the transistors runs are on the other side. No biggie but just make sure you make contact with the solder on the correct side. This will save you a few $$$. Should work fine. Let us know.
#2
#5
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
As a result I had no Speedometer or AWD light no AWD and no lights in the speedometer. After I soldered the unit back in everything worked fine and I just saved myself the $400.00 quoted to me at the dealership to-day.
![Smile](https://atvconnection.com/forums/images/smilies/smile.gif)
I can email pictures to those who want them.
Regards
RF
2000 Sportsman 500
#7
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Re: speedometer pics how do I post them or I can send and an attachment to you, My email is rmfuchs@telus.net.
Regards
RF
Regards
RF
Trending Topics
#9
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
The piece that fell out is located at the top of the picture.
http://rapidshare.com/files/27456689...edo_1.JPG.html
By the way, I had mine apart to replace the speedometer glass when I first bought the quad in 2000 after my son rolled it and it sealed up just fine.
Hope this helps.
Regards
RF
http://rapidshare.com/files/27456689...edo_1.JPG.html
By the way, I had mine apart to replace the speedometer glass when I first bought the quad in 2000 after my son rolled it and it sealed up just fine.
Hope this helps.
Regards
RF
Last edited by RFsportsman500; 09-02-2009 at 01:21 AM. Reason: http://rapidshare.com/files/274566894/Polaris_Speedo_1.JPG.html