I would like to be able to lock the factory front storage box. Is there some sort of lock available that works with the factory latches?

Mike

 

If I remember correctly I thought the X2's come with locking latches....But I think you have to modify it slightly.Someone correct me if I'm wrong......

John

 

Sorry I think it was the ATP's...

Polaris ATP Front Cargo Box Locks


John

 

This has been discussed earlier. I have done it on my 800. The parts come from ATP.

 

ya the locks are from an atp. part number #2874548 little bit of modifaction is needed. iv been wanting to do this to my front cargo box and my rear storage box. but i just havent yet.

 

Hey tipo176 those mirrors look nice. What brand are they, and where did you get them?

 

My bike are an EU spec road legal one. Rebuilt by Polaris/Egimotors in Italy. It got different front lights, brakes, horn, mirrors and direction indicators. (blinkers)

 

http://forums.atvconnection.com/pola...glove-box.html

 

The part number that's been given is what you need to get to start. You will be using parts from the ATP locks and parts from the Sportsman latches that are on the existing box. If I remember the ATP parts you use are only the ***** and lock barrel. The cylinder that goes through the lid of the box is going to be the existing one. It will have to shortened by about an 1/8th inch or so. The hooks are from the Sporstman. You have to see where the ATP lock pins will hit the old Sportsman cylinder and drill a hole so the pin can go into it to lock it. After that it is just putting it all back together. This is the best my old memory can help you right now. Hope it all works for you.

 

I never did any shortening or drillig on mine. Used the Sportsman hooks and the ATP **** and barrel. Used the rubber gasket on the inside and outside on both sides. (4 in total) Se link w/pic.