Help!!!!!
Sep 19, 2009 | 04:25 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Sep 2009
Posts: 2
Likes: 0
From: Fort Carson, CO
Help!!!!!
I need help, I recently rebuilt the carb on my 1996 Polaris Trailblazer 250. I removed all the pieces and put new parts from the rebuild kit back to the same settings as they were( I think I did atleast) but it won't run unless I hold the throttle half way and it spits fuel out of the carb. Can anyone tell me what I did wrong? (besides not taking it to a shop and having them do that in the first place)
Sep 20, 2009 | 08:09 PM
#4
Thread Starter
|
Weekend Warrior
Joined: Sep 2009
Posts: 2
Likes: 0
From: Fort Carson, CO
Duhhh
I fixed it. It was the needle valve I set it wrong. I reset it and now it runs like a raped ape. Thanks for your help. Now just have to find some good trails to test it out on.
