Polaris Discussions about Polaris ATVs.

Part Identification Help

Thread Tools
 
Search this Thread
 
Old Oct 22, 2009 | 08:04 PM
  #1  
onasport400's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2009
Posts: 13
Likes: 0
Exclamation Part Identification Help

Hello I was wondering if anybody knows what this part is and where it goes:



This is on a Polaris Sport 400L.

Thanks, Jimmy
 
Reply
Old Oct 22, 2009 | 08:07 PM
  #2  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

one way drain/overflow tube that goes to float bowl.
 
Reply
Old Oct 22, 2009 | 08:28 PM
  #3  
onasport400's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2009
Posts: 13
Likes: 0
Default

And comes from where?
 
Reply
Old Oct 23, 2009 | 05:17 AM
  #4  
stendori's Avatar
Super Quad Patrol
I'm watching you!
20 Year Member
Joined: Jul 2003
Posts: 14,269
Likes: 8
From: central maine
Default

comes from the carb.
 
Reply
Old Oct 23, 2009 | 10:55 AM
  #5  
onasport400's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2009
Posts: 13
Likes: 0
Default

Isn't the float bowl part of the carb?
 
Reply
Old Oct 23, 2009 | 11:05 AM
  #6  
02magnum500's Avatar
Pro Rider
Gets his share of deer.
Joined: Jul 2002
Posts: 463
Likes: 0
Default

Yes, should go on the nipple on the bottom of the float bowl as an overflow vent line.
 
Reply
Old Oct 23, 2009 | 11:12 AM
  #7  
onasport400's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2009
Posts: 13
Likes: 0
Default

Originally Posted by 02magnum500
Yes, should go on the nipple on the bottom of the float bowl as an overflow vent line.
Thank you, that's what I was looking for!
 
Reply
Old Oct 23, 2009 | 11:13 AM
  #8  
02magnum500's Avatar
Pro Rider
Gets his share of deer.
Joined: Jul 2002
Posts: 463
Likes: 0
Default

I use some superglue to hold the tube in place on the nipple.
 
Reply
Old Oct 23, 2009 | 11:15 AM
  #9  
onasport400's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2009
Posts: 13
Likes: 0
Default

OK. And does the other end just hang?
 
Reply
Old Oct 23, 2009 | 11:20 AM
  #10  
02magnum500's Avatar
Pro Rider
Gets his share of deer.
Joined: Jul 2002
Posts: 463
Likes: 0
Default

Yep, run the other end through along side the engine and down below the frame (should hang down when you look under your ATV), this just gets the drip or 2 of gas off your frame. then the gas will drip on the ground not your ATV.
 
Reply



All times are GMT -5. The time now is 10:59 PM.