Hard Steering in 4WD
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
When in AWD - and reverse - the steering pulls really hard to one side or the other. when put in low or high once this starts, it will pull hard to one side or the other and is very stiff to steer. I can usually get it to stop by moving the steering wheel back and forth or taking it out of AWD. I have changed all the fluids in the front end. Please help....
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Also clean and the right amount and kind of hub fluid is important. What year is the ATV?
And Tighten the castle nut to 165 In. Lb. Spin the hub a few revolutions and loosen the nut to finger tight. Now tighten nut to 124 In. Lb. to a maximum of 144 In. Lb
http://www.atvtime.com/phpBB2/viewto...003&pc_t=12521
And Tighten the castle nut to 165 In. Lb. Spin the hub a few revolutions and loosen the nut to finger tight. Now tighten nut to 124 In. Lb. to a maximum of 144 In. Lb
http://www.atvtime.com/phpBB2/viewto...003&pc_t=12521
Thread
Thread Starter
Forum
Replies
Last Post
Logan Collins
Classifieds, Garage Sale & Swap Shop
0
09-05-2015 08:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)