Polaris Discussions about Polaris ATVs.

05 Scramber issue's

Thread Tools
 
Search this Thread
 
  #1  
Old 06-25-2011, 05:10 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default 05 Scramber issue's

ok from the beginning, went riding 2 weeks ago,the throttle locked up closed (thank god) i tore it apart and the 2 screws that hold the cable housing on the carb came out and jammed everything up.

so i always would get a few drips of gas out of the over flow so while i had it tore apart i cleaned the carb it wasnt real bad.

so today i put the cable on and got enough back together to make sure it would run and it did, did my final put together and fired it up, got the cable adjusted and the Idle runs perfect.

Till i start to ride it when i get on the throttle..it dies out like its not getting fuel. and i still get a few drips of gas out of the over flow, so i deffinetly need to replace the neeedle, but whats some things that cause a starving for gas? could it be the float in the carb and bad needle valve?

thanks.
 
  #2  
Old 06-25-2011, 06:28 PM
user493's Avatar
Moto Psycho
Join Date: May 2008
Location: Michigan
Posts: 8,747
Likes: 0
Received 3 Likes on 3 Posts
Default

It there any junk in the gas tank?
 
  #3  
Old 06-25-2011, 06:45 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jumbofrank
It there any junk in the gas tank?
No, i just noticed its wet around the float bowl gasket, guess i will do a rebuild. thing ran perfect a few week and half ago.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
COFatboy
Polaris
12
05-02-2020 12:06 AM
Jenn1
Kawasaki
3
09-08-2015 09:16 AM
Findlay Tulloch
Polaris
23
08-25-2015 05:00 PM
WesTech
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
11
08-11-2015 07:55 AM
Unzzy66
Chinese Quads
1
07-11-2015 10:01 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 05 Scramber issue's



All times are GMT -5. The time now is 11:12 AM.