Overheating
#1
Help!!
I have a nearly new, never been dunked, very little mud exposed 2000 P500.
Several miles out my temp light came on. In retrospect I don't remember hearing the fan ever come on. I drove slow and stopped several times coming out of the woods. The first stop I did not hear it boiling, but by the tim I finished the last mile it boiled over.
What usually fails this early.....thermister?, thermostat? or fan motor? The motor, after it cooled down starts, idles and seems to run ok.
Did I ruin it?........How can I tell if a major disaster is fixing to happen?
Any comments wouldbe appreciated.
Thanks
Hugh
I have a nearly new, never been dunked, very little mud exposed 2000 P500.
Several miles out my temp light came on. In retrospect I don't remember hearing the fan ever come on. I drove slow and stopped several times coming out of the woods. The first stop I did not hear it boiling, but by the tim I finished the last mile it boiled over.
What usually fails this early.....thermister?, thermostat? or fan motor? The motor, after it cooled down starts, idles and seems to run ok.
Did I ruin it?........How can I tell if a major disaster is fixing to happen?
Any comments wouldbe appreciated.
Thanks
Hugh
#2
First of all, if you have any warranty left take it into the dealer.If not blast any mud or debris out of the rad fins using a strong hose or pressure washer and do it every time you go out.
If it isnt plugged you probably have a thermostat problem.
Hope this helps.
Matt
2000 500 Scrambler.
If it isnt plugged you probably have a thermostat problem.
Hope this helps.
Matt
2000 500 Scrambler.
Thread
Thread Starter
Forum
Replies
Last Post
MikeyBoyesq
ATV Racing
1
Aug 10, 2015 11:11 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



