I tried to get to your pics on snorkling your 500 but get a restricted area message. is it still there?I'm looking to snorkle my HO but cant figure where to run things,I know where to run them I just cant figure how to run them?
Anybody have any pics??

 

His pictures are no longer up and the snorkel has been sold.

 

The intake for the tranny uses 1.5"abs, and the exhaust also uses a 1.5" abs. You will need a 2" to 1.5" quick connect to make the connection off the pvt exhaust. The peices are fairly cheap. Just go and by several 45s and 90s, and 2 60s and dry fit the snorkel until you get it the way you want it. If you plan to snorkel the airbox, you will need to use 2" abs. You will have to cut a hole in the side of the airbox near the rear. Just design this snorkel the same way. The first time I snorkeled a quad, it was just trial and error dry fitting.

Good luck, and sorry about the lack of pics. I think there are some folks that have copied some of my pics. I will try to get them to post them for you.

Greg

 

Thank You ,I'm gonna give it a shot.
hopefully sooner then later