Our 2007 Ranger came with a Curtis Industries Freedom Cab. We need a new right side door panel. Curtis Industries no longer makes these. We've done alot of searching on the internet to find a used one & have been unsuccessful. Any ideas? Only other option is to try to somehow "glue" or tape the plastic puzzle pieces back together to try to support the window.

 

Being almost 10 years old,you might have to repair it yourself. Had the same thing happen on several Polaris suppliers as well as Curtis cab parts.I'd keep a eye out on ebay,craigslist,etc along with any salvage companies. This fella had the same problem on a John Deere.Curtis cab --------GRRRRRRRRRRR!
https://www.powersportsnetwork.com/e...tCategoryCode=

 

Thanks for replying! $4000 for a whole new system is nuts. :-/ We'll keep checking those sites.

 

If you can find parts for this cab please let other know.We had enough problems on older aftermarket replacement parts at the shop. Customers weren't too happy on this also when suppliers told us parts were NLA.We installed a bunch of Curtis cabs,they were well built,but they should have had a good supply of parts for people. Guess it's like the rule of thumb on many atvs and parts also.Time line is around 10 years on a lot of parts support,especially on atvs that didn't sell well or specialty or low production vehicles.