Polaris Predaor Help!
Hey guys so i just got done putting in a new transmission on my 05 predator 500 and I'm having some issues with putting the crankcase back together. I have the transmission in neutral and put the sides together and everything spins freely, but once I torque the two sides together the transmission binds up and wont spin at the input shaft. Anyone have any idea what could be causing this?
|
Needs to be in neutral. If it still binds up,recheck that bearings and shafts are seated, shift drum and forks correct,etc
|
Everything seems to be right, bearings are seated, have it neutral. The input shaft will spin when I put the crankcase together but as soon as I torque the bolts down it locks up.
|
Then something is still wrong in the gear cluster unless you've mixed matches cases from another machine.
|
Did the shift shafts fully seat down. This was a challenge with our tranny assembly.
Not sure if you have the same tranny as our 94. |
All times are GMT -5. The time now is 06:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands