Polaris Discussions about Polaris ATVs.

Fan

Thread Tools
 
Search this Thread
 
Old Mar 30, 2017 | 11:03 AM
  #1  
Atvassassin777's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 10
Likes: 0
Default Fan

Hey everyone, replaced my ecm yesterday, all is running smooth except i cant get fan to come on! Running hot, all oil and coolant levels are fine, radiator is clean, all wires look great! Any idea on a starting place?
 
Reply
Old Mar 30, 2017 | 11:20 AM
  #2  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

You can jump 12 volts to the fan motor itself and see if it works. If it doesn't Spal fans have replacements.https://webstore.spalusa.com/en-us/p...rcycleatv.aspx If fan works then recheck connections.
 
Reply
Old Mar 30, 2017 | 11:26 AM
  #3  
Atvassassin777's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 10
Likes: 0
Default

Placing connections where to jump it? Pretty new at this atv stuff! 06 sportsman 450
 
Reply
Old Mar 30, 2017 | 11:31 AM
  #4  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

Just run separate ground and positive wire from a battery to the fan connector.
 
Reply
Old Mar 30, 2017 | 11:33 AM
  #5  
Atvassassin777's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 10
Likes: 0
Default

Thank you OPT!!
 
Reply
Old Mar 30, 2017 | 02:39 PM
  #6  
Atvassassin777's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2017
Posts: 10
Likes: 0
Default

Tried the wiring trick with no luck! Guy at polaris told me about a sensor on bottom of radiator but no luck finding that either! Any other options??
 
Reply
Old Mar 30, 2017 | 04:23 PM
  #7  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

Look at your other post... easier to keep posts in one area rather than jumping around.Couldn't hook the fan up to a battery to see if it works or not or what?
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:34 PM.