PLEASE HELP!!!!!!!!!
Jun 12, 2001 | 01:48 PM
#1
Thread Starter
|
Range Rover
Joined: Dec 1999
Posts: 188
Likes: 0
I really need to know the torque settings for the primary clutch cover. The six bolts that hold the cover on and the center bolt.
And if you know what does the secondary clutch bolt need to be torqued at. I just got a clutch kit from ftr and what to go riding this weekend and really need to know.
Thanks
And if you know what does the secondary clutch bolt need to be torqued at. I just got a clutch kit from ftr and what to go riding this weekend and really need to know.
Thanks
Jun 12, 2001 | 05:18 PM
#2
Range Rover
Joined: May 2001
Posts: 200
Likes: 0
Ask for and ye shall recieve!
Drive pulley screw- 40 ft-lbs
Driven pulley screw- 17ft-lbs
Inner cover screws- 12 ft-lbs
DRIVE PULLY COVER SCREWS- 7.5 ft-lbs
Spider to fixed sheave- 200 ft-lbs
This is straight from the Clymer manual
Hope this helps!
Drive pulley screw- 40 ft-lbs
Driven pulley screw- 17ft-lbs
Inner cover screws- 12 ft-lbs
DRIVE PULLY COVER SCREWS- 7.5 ft-lbs
Spider to fixed sheave- 200 ft-lbs
This is straight from the Clymer manual
Hope this helps!