Polaris Discussions about Polaris ATVs.

Looking to ride-Owensboro, KY

Thread Tools
 
Search this Thread
 
Old Aug 9, 2001 | 11:38 AM
  #1  
walexa's Avatar
Thread Starter
|
Pro Rider
Joined: Jan 2000
Posts: 779
Likes: 0
Default

I live in West Monroe, Louisiana, but am presently working in Owensboro, KY. If any of you have groups that go riding frequently, let me know. My email address is walexan@hotmail.com

Thanks,

Waylan
 
Reply
Old Aug 9, 2001 | 03:16 PM
  #2  
400fnSport's Avatar
Range Rover
Joined: Jun 2001
Posts: 200
Likes: 0
Default

Hey, what do you mean you don't know where to ride. You just rode with us the other day.[img]i/expressions/face-icon-small-happy.gif[/img] This is Curt, the one with the 400 Sport that took forever to start. Well, what a small forum it is. If you've read my post on the board, I found out it wasn't the carburator. Haha, this is crazy.
 
Reply
Old Aug 9, 2001 | 10:43 PM
  #3  
mx44's Avatar
Weekend Warrior
Joined: Aug 2001
Posts: 1
Likes: 0
Default

Hey Waylon, This is Austin. There is a place out 431 right past Utica called Barret Hill. We use to ride there a lot ubntil they blocked off where we parked now we have to ride from a friends. It is a good area for utiltiy atv's but 300ex lack in ground clearance which is a must out there. There is a stretch called power ally where you ride trails and hills through 3 counties.
 
Reply
Old Aug 10, 2001 | 09:04 AM
  #4  
walexa's Avatar
Thread Starter
|
Pro Rider
Joined: Jan 2000
Posts: 779
Likes: 0
Default

Austin, are there any riding plans for this coming weekend?
 
Reply
Old Aug 10, 2001 | 04:18 PM
  #5  
400fnSport's Avatar
Range Rover
Joined: Jun 2001
Posts: 200
Likes: 0
Default

I haven't heard anything, but I'm sure we'll be going somewhere this weekend. I have a Yamaha that I ride when my Polaris isn't able to make the trip. It's just not that good of a hill climber. It don't have the power, but for a 200, I manage pretty good with it. And here is your wreck Austin. I couldn't get any sound for some reason. I'm going to see if they will let me put it in the multimedia section.
 
Reply
Old Aug 10, 2001 | 04:54 PM
  #6  
walexa's Avatar
Thread Starter
|
Pro Rider
Joined: Jan 2000
Posts: 779
Likes: 0
Default

Curt,

What are you going to do about the engine in your 400? I'll probably go riding at the strip pits Saturday. Any chance any of the group will be there? I hope so. My number is 270-926-6339. If you call and I'm not there, just leave a message, and I'll call you back.

BTW, do you know if Austin and Gary are racing this weekend? If so, where and when? I might go.

Later,

Waylan
 
Reply
Old Aug 10, 2001 | 05:58 PM
  #7  
400fnSport's Avatar
Range Rover
Joined: Jun 2001
Posts: 200
Likes: 0
Default

As for my 4 wheeler, I'm probably just going to rebore, and put in a new piston. But I first want to make sure it was the fault of Motor Electric. Their the ones who bored it out. But I'm going to make sure there wasn't anything else wrong with my motor that could have caused it. I don't think it is, but I don't want to go thru this again. This will make the forth piston in it. So I'm going to make sure everything is correct. When we ride, it's usually at Green's, so I'm sure someone will be out their. Either Gary, Austin, or Rob. Rob lives out their pretty much, plus him and his friend are supposed to bring in that steer shovel.(I think that's what it's called) As for racing, I'm pretty sure there not. Unless they decide to go somewhere else to run. The Fall 2001 season at Nebo start on Aug. 18. So I know we'll all be going then. You should go with us, it's pretty fun because we usually have someone riding in every quad and bike division. Except for the 2 stroke open which I was going to run. Anyway, I'll call up Gary later and see what's going down this weekend. When Austin gets home later, he'll probably be able to tell you more than I could.
 
Reply



All times are GMT -5. The time now is 01:09 PM.