Rode a modded sport 400
#1
The other day my freind took me over to his sister's boyfriend's house.He has a sand drag banshee a a sport 400.It had a Dg pipe,some other loud silencer,rad valve wiseco piston,clutch kit,clutch weights I think it had a little porting done,a 39 pwk.
Needless to say I was very impressed!The thing launches pretty hard for being a belt slipper!It pulls wheelie's with ease and really impressed me.It was very impressive.Nothing like my freinds trailblazer.He said he has a roller helix to but he said that it won't even hardly move.
I think my R would get it for a while and then the polaris catch up don't know though.When I find out I will tell U.(maybe depends on the results!hehe)
His banshee it bad to.It has a 7 inch over swingarm and he was starting in 3rd gear and when it shifted to 5th the front tires where coming up.IT was bored to a 370,cool head,wiseco pro lite's,reed spacer,rad valves,34 pj's,ftz drag pipes,he had pro wedge's on the back and he was digging 6 innch ruts across his yard while throwing about 35 foot of roost!
He has a couple of really nice bikes.
86 trx250r setup for mx
97 300ex
Needless to say I was very impressed!The thing launches pretty hard for being a belt slipper!It pulls wheelie's with ease and really impressed me.It was very impressive.Nothing like my freinds trailblazer.He said he has a roller helix to but he said that it won't even hardly move.
I think my R would get it for a while and then the polaris catch up don't know though.When I find out I will tell U.(maybe depends on the results!hehe)
His banshee it bad to.It has a 7 inch over swingarm and he was starting in 3rd gear and when it shifted to 5th the front tires where coming up.IT was bored to a 370,cool head,wiseco pro lite's,reed spacer,rad valves,34 pj's,ftz drag pipes,he had pro wedge's on the back and he was digging 6 innch ruts across his yard while throwing about 35 foot of roost!
He has a couple of really nice bikes.
86 trx250r setup for mx
97 300ex
#2
<< [i]It had a Dg pipe,some other loud silencer...I think it had a little porting done,a 39 pwk.
<< [i]
Depending on who did his porting, you should ride a full race HPD bike. By your comment on the silencer I wouldn't be suprised if RCR did his work, which is not a bad thing. Rick does excellent work. I'm suprised he is using an DG pipe?
#3
Hey Ugly...Come on down to St. Joe next weekend and I'll let you ride my HPD race motor on alcohol. The thing about Polaris is that you don't feel like you are going fast but you are. I also have a 440EX that runs good. I was at St. Joe this past Saturday and Sunday with a bunch of other EX's. Next time your're down that way look me up. I have a white extended cab Dodge and usually park up next to the railing when you first pull into the staging area, look for the blue canopy.
Later
Jay
Later
Jay
#4
Hey pudjumper do U race at big river sand drags?That is where this guy races his shee.
His name is mark.I am not sure of his last name.
I would go to st joe.But my truck is in primer and I got to get a job to get insurance.So It will be atleast another month.before I will be down there.But first thing.I am gettin some paddles and a new clutch for my R and U will find me.
I drive a 90 s15 extended cab 4wd.IT is red and MY R is red and white with a bunch of stuff.I am little skinny guy so U will know it is me.
His name is mark.I am not sure of his last name.
I would go to st joe.But my truck is in primer and I got to get a job to get insurance.So It will be atleast another month.before I will be down there.But first thing.I am gettin some paddles and a new clutch for my R and U will find me.
I drive a 90 s15 extended cab 4wd.IT is red and MY R is red and white with a bunch of stuff.I am little skinny guy so U will know it is me.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Drivetrain, Suspension & Tires
2
Sep 30, 2015 01:37 AM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Sep 23, 2015 06:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




