ATVConnection.com ATV Enthusiast Community

Polaris Discussions about Polaris ATVs.

HPD c.a.t.t.

Thread Tools
 
Search this Thread
 
Old Sep 24, 2002 | 11:24 PM
  #1  
scramblered's Avatar
Thread Starter
|
Pro Rider
Joined: Sep 2000
Posts: 1,867
Likes: 0
Default
for custom aluminum thumb throttle,i use it for 1 season yet,the cable broke some weeks ago and i'll get new cable pretty soon so i was wondering if there is any fine tune specs to set the cable right,thanks.

 
Reply
0
Old Sep 24, 2002 | 11:38 PM
  #2  
talonhawk's Avatar
Pro Rider
Joined: Oct 1999
Posts: 743
Likes: 0
Default
I've had mine on all season and not had any problems with it.
It should have a wide variaty of adjustments.
 
Reply
0
Old Sep 26, 2002 | 11:40 PM
  #3  
scrambansheeman's Avatar
Trailblazer
Joined: Jul 2001
Posts: 49
Likes: 0
Default
yes mine broke quick also. you need to take a dremel or air grinder inside the housing and grind a route for the cable so it wont rub.
 
Reply
0
Old Sep 27, 2002 | 01:37 PM
  #4  
modquad's Avatar
Elite Pro Rider
Joined: May 2001
Posts: 5,309
Likes: 0
Default
Also remember to lube the cable and inner workings of the assembly. I use Tri-flo (with teflon)displaces water also.

Ken
 
Reply
0
Old Sep 27, 2002 | 04:21 PM
  #5  
scramblered's Avatar
Thread Starter
|
Pro Rider
Joined: Sep 2000
Posts: 1,867
Likes: 0
Default
thankx guys,it is done by now,i've made a new route for the cable and lube it pretty well,the trigger is very "free" now and work well,the SNAP times are back.

 
Reply
0



Advanced Search

All times are GMT -5. The time now is 05:50 AM.