I was wondering if anyone has the Aaen roller secondary installed on there Scram's or other Atv's and what is the feedback on them are they worth the money how is the performance the price is a little better than the HPD ,Team industries and hotseat. Money is a little tight right now so lookin for bang for the buck in a perfect world I would get the HPD as all my other mods are but I think this mod really does not require to HPD seeing how all my springs and such are already HPD.

Thanx in advance

 

I've run the HPD roller for a couple of years now, works great. I am in the process of changing it to the Team Performance roller.....IT'S THE TICKET. Available at HPD, Team performance, or Hot Seat.

 

I had the AAEN roller set up in my 99 Scram 400 4x4 with HPD trail mod and more. I used the springs and weights from HPD's aggressive clutch kit for trail porting. It was great and I never had a single problem out of it.

 

modquad I was looking at them too looks like a sweet setup but is there a much of a diff in the performance I know the team one is a complete secondary but they are all roller systems is there that much of a performance gain Thanx

FTZLT250r
was there much of a gain in performance , Is there a noticeable diff in power to the ground and Backshifting Thanx

 

Every aspect of it was much smoother, and the back shifting was a lot quicker. Going into a corner, let off, gas it again, and it was right there.

 

Hey buy the Team clutch. I have riden sleds with the Team clutch on them and there is a difference. I rode one with it and one without you notice the difference off the corners and and in deep snow they just seam to pull harder. I am still trying to get one for my 500 HO I get a little kick back cause I work for Team but nothing yet. I'll let ya know when I get it and how it performs on quads. [img]i/expressions/face-icon-small-cool.gif[/img]

 

Like the others said, there is definitely a difference. The Team unit is much heavier duty, and is completely purpose built from the ground up, not modding a pre-existant part....not that the others are bad, the Team unit is another step up. I can't wait to try the two new clutches together.

 

FTZLT-250r when you ordered it (aaen roller) did it come with the helix or can you use your old helix

 

The AAEN does come with it's own helix. The roller housing and the AAEN helix replace the stock type helix. It is not possible to use the stock type of helix.