I just bought a tether kill switch for my warrior and I need to know if the warrior has a open or closed circuit?

Thanks [img]i/expressions/face-icon-small-smile.gif[/img]

 

nobody knows? Is yamaha generally open or closed circuit?

 

i know i should be posting this in the yamaha forum but i get no replys there either[img]i/expressions/face-icon-small-shocked.gif[/img]

 

I don't think that really matters, just splice the tether into the orange wire on the coil like everyone else does and you won't have any trouble.

 

well... I figured it out, I got the wrong kill switch (I needed the closed circuit and I got the open circuit[img]i/expressions/face-icon-small-blush.gif[/img]). I did exactly what recon said but the kill switch was reversed. I had to have the coil off for the engine to run. I even tried reversing the two wires and that didn't work either. I now have to go and get another kill switch[img]i/expressions/face-icon-small-frown.gif[/img] w/e life goes on [img]i/expressions/face-icon-small-smile.gif[/img]

 

Ehh, how did you wire it up? One to ground, one to the coil wire? Or did you try to wire the switch in series with that wire?

 

i probly just did it in series [img]i/expressions/face-icon-small-blush.gif[/img].

So im guessing I have to put one to the coil and one on the frame?

 

Yep

 

well... i changed my wiring and what do you know.... it works! [img]i/expressions/face-icon-small-smile.gif[/img]

thanks recon haha

 

no prob