OK, here's the problem, my warrior won't start right up (it starts but I'm crankin on that thing for a while till it starts). about two weeks ago I started having the problem it startup up from the cold (sometimes it would cut out and if I was lucky it would start up right after that) and when it wouldn't start up then I would spraystarting fluid into where the spark plug is and it pop right over and now it won't start no matter what. PLEASE HELP!!! it's fully upgraded (exept for hotcam) and carb is jetted to 4.75 I think? and when I put a new spark plug in then it pops right over but the problem comes back about two starts later!

 

So after you have installed a new plug, and the problem comes back, what does your plug look like? black im guessing?

 

yes it was black (the last one), but the new one that I put in is only a little black and is dry when I take it out. And the last plug got black in one or two rides, this one is only a little black and ive taken it out 3 times. it starts but I have to crank on it for a very long time and now the starting fluid doesn't do anything. MIKE