i went to stanthonys this last week and i took a hard spill bike flipped 4 or so times i bent the steering stem and bars so i pulled it apart and had a local machine shop straiten the stem put it all back together and thought i was done well come to find out i broke the bearing carrier in half and bent the axle and tie rods so now i get to do the suspension thinking of the gibson long travel a arms and antivibe stem and some elkaswith a plus 1 swing arm anybody know were i can get the best deal ? or should i go with roll aarms and swing arm? thanks

 

That's too bad. My buddy rolled his hard and bent his steering stem and bars too but luckily that was all he bent not nearly as bad as yours i'd go with roll design but im not sure where you can get the best deal. good luck

 

[img]i/expressions/face-icon-small-shocked.gif[/img]. Sorry to hear about your crash. I've heard good things about burgard too. Elkas would be good too...

 

thanks for the help guys

 

Sorry to hear it, hope your ok!! At least now you can do the suspension!!!!!!!

 

Sorry about your spill,,,,,,but at least your ok and you have a good reason to buy more parts !!!!!

 

I'm also sorry, I hate to hear about any fellow quad rider having an accident. If you're like me you're just sick over your quad and not worried about yourself but I hope you're o.k. Just remember you can always get that thing fixed but if you're out of commision yourself then you defintly can't get that quad fixed. Good luck.

 

im ok i could not lift my arm the last 2 days of the trip but it is feeling alot better now and i will b back at work tomorrow "yeah" i have the whole crash on helmet cam so maybe i can figure out how to post it or some pics of it

 

When did you do this cause I was there this past weekend 30 May-1 Jun, the only crash we heard about was a dude on a sandrail that jumped off a dune and compressed his back. He was taken to the hospital. Anyway sorry about your wreck, have fun with the new parts.

 

I was doing a steep hill climb and my z400 flipped back over me and not only rolled down the hill but also started to bonce 4 feet in the air as i watched pieces fly everywere. i bent my axle, all four rims, demolised myhandle bars. ripped my back plastic off and bent my front right spindle. My z has been in the shop for 3 month and im paying about $1000. But in the long run i guess it was cool becuase i got a rad durablue axle and nice aluminum rims.