zilla guys, i need help!!!
#22
#23
#25
zilla guys, i need help!!!
i got my reeds in today and got her dialed in finally. I took it for a good ride and now its performing the way a quadzilla should. I lined up with the banshee and smoked it real good. i even blew a shift and still couldn't get in front of me. Thats pretty good considering my banshee has brand new maxxis razr's and the quadzilla actually still has the stock tires from 87!!!!
Seems like it is a real good runner..i think it 's a keeper!!
now to startr tweaking a little more
Seems like it is a real good runner..i think it 's a keeper!!
now to startr tweaking a little more
#26
zilla guys, i need help!!!
Good to hear you got it cleared up, 700. Bet she starts up real easy now too. What oil did you end up using??
Those "priceless" looks you mentioned will be missed if I do part with my Zilla.
Just keep a close eye on your jetting! 10 degree temp change, and humidity play a factor in proper jetting.
I always do a plug chop before every ride just to be positive its not too lean.
110 octane fuel or better is a good idea even for a stock Zilla.
Keep Rippin Those Shees!!!!!!
#28
zilla guys, i need help!!!
Yeah, cept the banshee is mine too so it wasn't as sweet as it should've been.!!
she starts real easy, your right freak. And i'm keeping it on the rich side a little, just till the top end is worn in a little. I'm running a 410 main, needle dropped one position, and air screw at 1 3/4 out with the new reeds and a uni filter and k&n pre-charger and stock carb. I'm getting a little closer to black than tan on the plug, so i think i'll leave it like that, but i'll keep an eye on it for sure.
might head out to a local hot spot this weekend called "the wall". maybe i can smoke someone elses banshee..ha, ha
i need some new rubber though, the dunlops just spin like crazy...right up to 4th. i like the razr's on the my banshee. they are also pretty cheap now that the razr2's and irazrs are out. maybe i'll grab a set for the weekend
she starts real easy, your right freak. And i'm keeping it on the rich side a little, just till the top end is worn in a little. I'm running a 410 main, needle dropped one position, and air screw at 1 3/4 out with the new reeds and a uni filter and k&n pre-charger and stock carb. I'm getting a little closer to black than tan on the plug, so i think i'll leave it like that, but i'll keep an eye on it for sure.
might head out to a local hot spot this weekend called "the wall". maybe i can smoke someone elses banshee..ha, ha
i need some new rubber though, the dunlops just spin like crazy...right up to 4th. i like the razr's on the my banshee. they are also pretty cheap now that the razr2's and irazrs are out. maybe i'll grab a set for the weekend