How do you tell if a clutch is bad?
I have a 2006 LTZ440(Big Bore) and I think the clutch is bad. I intend to take it apart and see if I need to buy plates/disks/basket, etc...
What do I look for and how do I tell what parts I will need to buy? Thanks! |
measure the thickness of your fiber plates. they should be thicker than 2.62mm and the claw width should be thicker than 13.2mm. if these are under than its time to replace clutch
|
in my 03 ltz 400 i could telll my clutches were going out by just put putting around the yard n shifted to 2nd and it would hit the red limiter really fast.... n i didnt really pay anything to it.. but i went riding with a few friend and by the end of the day i could put it in first n put the clutch n it wouldnt go anywere. even wen floored... also look at the clutch basket for grooves in them..
|
Originally Posted by Soulphire
(Post 2943066)
I have a 2006 LTZ440(Big Bore) and I think the clutch is bad. I intend to take it apart and see if I need to buy plates/disks/basket, etc...
What do I look for and how do I tell what parts I will need to buy? Thanks! |
if your like sand hog and your made of money bring it to the dealer. but if you have some mechanical ability and money is a object in your eyes dont ride it until you dont go anywhere like lucky. if you change the fiber discs before there gone you can ussually reuse the steel plates 2 times. and measure them as newport says
|
Originally Posted by himsa169
(Post 2943828)
if your like sand hog and your made of money bring it to the dealer. but if you have some mechanical ability and money is a object in your eyes dont ride it until you dont go anywhere like lucky. if you change the fiber discs before there gone you can ussually reuse the steel plates 2 times. and measure them as newport says
And that is all I got to say about the subject. |
All times are GMT -5. The time now is 05:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands