Lt80 won't idle.
Got my lt80 out of storage to get it running to sell. Put oil and gas in started right up with choke on with choke off it dies. Rebuilt carb with same result, checked compression 120-125, checked for air leaks around carb and reed cage good. Placed carb back in burn out tank for 24hrs new rebuild kit didn't work. Any ideas?
|
If you give it a lil throttle does it keep running?
Is your throttle cable adjusted correct on top of the carb? |
What Jack said...check the carb slide connection to the cable, make sure the cable is screwed onto the slide cover...
otherwise re-check that idle (pilot) jet...its got itty bitty tiny holes that like to clog... |
Well since my first post I checked the cable ok at top. I took the carb to my friends shop and he ultra sonic cleaned it and it looks brand new. Put all new jets, o-rings and gaskets in it. Put it back on checked top again and still doing same thing. Run great with choke on and dies when you turn choke off. Air filter good pepcock seems to be working put a little vac on it and it opens up and flows gas. I can keep it go a bit at high end and then it falls off. This thing is getting the best of me. Help!!!!
|
One more question can old reeds cause this. Boysen two stage. Checked them and they look good.
|
As long as they are not cracked, the reeds are fine.
Providing the cable is adjusted properly, the choke circuit is faulty. The lil passageways can get blocked and cannot be cleaned. If you cannot get it right, I'd recommend a ebay carb. |
Hey THANKS LT80 for the info. I do have new carb on the way.
|
Well hear we go again new carb came in and long story short doing same thing still won't idle with choke off runs great with choke on. Checked compression again just to check and again got 125 four times. What am I missing?
|
Plugged pipe?
|
Originally Posted by LT80
(Post 3329467)
Plugged pipe?
|
All times are GMT -5. The time now is 08:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands