Greetings fellow mud beings
Has anyone any experience with how to install the Warn 424 select? Is it a one man job? Once installed did your quad handle alot better? What make and model of atv did you put it on? Was it better on gas?
Any feedback would be appreciated. [img]i/expressions/face-icon-small-smile.gif[/img]

 

i cant speak for the warn 424 owners but i can say that my un-locker made a huge difference in my Rubicon. it will kick the rear out on command and roost mud from here to hell. the only drawback i found is the breaking. on a 4 wheel drive all 4 wheels are locked together so when you press the back brakes it acts on all 4 wheels, same with the front brakes. in 2 wd its like a sport quad, mash the front and the front slows you down, mash the back and the rear locks up and slides. it is not to big a job to install for 1 man. you have to take the front differential loose and slide it foward so you can get the drive shaft out. then you have to route your cable and find a place to mount it. hope this helps

 

These are the quads listed in Rocky Mountain for the 424-
Rancher 350 4x4 00-03
Rubicon 500 4x4 01-03
TRX300 4x4 93-00
TRX400 4x4 98-02
TRX450 S/ES 4x4 98-01

 

I have the warn 424 unit on my '98 Forman S, I installed it my self and am very pleased with its performance. Installation is easy, a one man job and a couple hours if you really, really take your time. Directions are fantastic with lots of great pictures. I highly reccomend it to anyone with a full time 4x4 atv.

 

Greetings fellow mud beings
Thanks thats great information Action450S.
Yes Coyotechaser thats right and they also have them available for the Yamaha Wolverine and Kawasaki Prairie KVF300 at www.atvtires.com [img]i/expressions/face-icon-small-smile.gif[/img]

 

I had a dealer put on my Warn 424 Switch and I LOVE it!
Only problem is it is leaking gear oil from it. I took it for a weekend trip in lots of mud and water.

Anyone else have problems with their 424 Switch??

Thanks in advance

 

Skidder, My RM catalog didn't list the 424 for those quads. It would be good to have a 424 on the Wolverine.

 

Doesn't Warn only make 424's for Honda's?

 

I went to that site and saw that they are coming out with the 424 for those two on July 10. I guess the 424 is out for the Wolv. 2000-2003 already. I'd like to know how the 424 effects the Wolv. handling.

 

I have the 424 on my '01 wolv. I love it. It really makes a noticeable difference in the ease of turning the wheels and in the turning radius. It also makes it much sportier. I think it is a must for any full time 4x4.