Old PSAR thread - please see the new one
Carl,
Sorry about the carnage.
Our swingarm pivot bushings are getting worn too. The torque will twist it all right.
Be sure your tranny case didnt suffer any damage from the broken/binding chain.
good luck
Sorry about the carnage.
Our swingarm pivot bushings are getting worn too. The torque will twist it all right.
Be sure your tranny case didnt suffer any damage from the broken/binding chain.
good luck
Originally posted by: HappaRap
I have a ton of chores to do if I want to ride Sandlake the 7th, need to get off my lazy azz and get busy. Same goes for next weekend also, work around house, get camping gear ready and quads [img]i/expressions/face-icon-small-smile.gif[/img]
Larry
I have a ton of chores to do if I want to ride Sandlake the 7th, need to get off my lazy azz and get busy. Same goes for next weekend also, work around house, get camping gear ready and quads [img]i/expressions/face-icon-small-smile.gif[/img]
Larry
If I try to sell and buy a house again someone please kick my ars!! Three buyers fell through, something about $90k for sewer and water if three houses were to be built, along with that no good grey pipe they call "Poly Butylene" in our house that is only eight years old and never leaked but needs to be replaced cause it has a bad name for itself.
Anyway once i'm into my new garage, I mean our new house I will be spending some much needed time fixing and hopefully lowering and widening the KFX.
Woodland series starts Oct 17 and I had told Loki and Raptorchick that Im a gonna be the newbie out there. So I better get everything ready along with getting a few rides in again with some of my buddies.
I kinda miss not riding with that old Kareoke host from Texas[img]i/expressions/face-icon-small-happy.gif[/img]
New pictures posted of our Isabel Lake trail ride yesterday. Pending approval.
Carl, luckily the Scrammy didn't have problems up at the bridge. It's a long haul down from there.
Carl, luckily the Scrammy didn't have problems up at the bridge. It's a long haul down from there.
Originally posted by: Red400EXRod
New pictures posted of our Isabel Lake trail ride yesterday. Pending approval.
Carl, luckily the Scrammy didn't have problems up at the bridge. It's a long haul down from there.
New pictures posted of our Isabel Lake trail ride yesterday. Pending approval.
Carl, luckily the Scrammy didn't have problems up at the bridge. It's a long haul down from there.
Well it sounds like I missed a good ride.[img]i/expressions/face-icon-small-sad.gif[/img] The worst part is I went 8 hours yesterday, thats toooomany on a 95 degree Saturday. Then I was to burnt to drive up and visit. maybe next time.
Dirtymommy, if you guys go call or stop by and talk us into going to 5000.
Dirtymommy, if you guys go call or stop by and talk us into going to 5000.
Originally posted by: sandbomber
I will get my drunken shee back tuesday[img]i/expressions/face-icon-small-happy.gif[/img]Boy what a BEAUTIFUL day at sand lake!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Originally posted by: Bigdaddy660R
Are you going to get the shee today??????
Originally posted by: sandbomber
Just might see Qutie today at Sandlake dialing in!!!!
Just might see Qutie today at Sandlake dialing in!!!!
Dirtmomma
His new pictures are pending approval, that's the reason his camera is non-existent [img]i/expressions/face-icon-small-wink.gif[/img]
Larry
His new pictures are pending approval, that's the reason his camera is non-existent [img]i/expressions/face-icon-small-wink.gif[/img]
Larry
Originally posted by: HappaRap
Bing
Did you ever replace your throttle housing? and if not has the wire held up? That round extension that the cable runs through broke off at Easton and I need to do something before Sandlake. What do you think, wire it, JB weld, Terry Cable, duct tape, can't find a stock one on e-bay. Suggestions?
Larry
Bing
Did you ever replace your throttle housing? and if not has the wire held up? That round extension that the cable runs through broke off at Easton and I need to do something before Sandlake. What do you think, wire it, JB weld, Terry Cable, duct tape, can't find a stock one on e-bay. Suggestions?
Larry






