Old PSAR thread - please see the new one
Jan 20, 2005 | 12:59 PM
Pirate Biker
Limping Rider!
Limping Rider!
Joined: May 2003
Posts: 61,586
Likes: 55
From: Snohomish, Washington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: Dirtmomma
LOL awwee come on Rod [img]i/expressions/face-icon-small-wink.gif[/img] it won't cost much to do what you want [img]i/expressions/face-icon-small-smile.gif[/img]
Originally posted by: Red400EXRod
Kym,
You have an email.
I'm not looking to make the Blaster a screamer, I just want a little better performance without spending ALOT of bucks on the engine.
Kym,
You have an email.
I'm not looking to make the Blaster a screamer, I just want a little better performance without spending ALOT of bucks on the engine.
Jan 20, 2005 | 01:22 PM
Pro Rider
Joined: Oct 2004
Posts: 429
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
There are two hearing next week in the leigslature on bills to enact new restrictions on ATV and ORV use. Go to this forum thread for more information.
http://forums.atvconnection.com/mess...TARTPAGE/1.cfm
http://forums.atvconnection.com/mess...TARTPAGE/1.cfm
Jan 20, 2005 | 01:51 PM
Monkey Rider
Afro-Engineer
FREE AND NOW are the best
Afro-Engineer
FREE AND NOW are the best
Joined: Aug 2004
Posts: 38,396
Likes: 0
From: The Asphalt Jungle
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: Red400EXRod
My electric gun wouldn't even push 1/4" staples halfway in. Plus the material was really thick and I was worried about getting it tight enough to take out all the wrinkles.
I have installed gripper seat covers before but that material is thinner, it was also on my Blaster (see I do have a Yamaha).
I have a gripper to put on Cindys 250ex. I'll see if my staple gun will work on that, if not I mat take it back to Trimcraft again.
Originally posted by: maggiesboy
Don't get your deals all twisted up yet! That takes a "killer" staple gun huh Rod? Small air, and 80% of electric guns will not do the job.
Don't get your deals all twisted up yet! That takes a "killer" staple gun huh Rod? Small air, and 80% of electric guns will not do the job.
I have installed gripper seat covers before but that material is thinner, it was also on my Blaster (see I do have a Yamaha).
I have a gripper to put on Cindys 250ex. I'll see if my staple gun will work on that, if not I mat take it back to Trimcraft again.
Jan 20, 2005 | 02:03 PM
"One Wheel Short"
slow day around the orafice I see!
slow day around the orafice I see!
Joined: Jun 2004
Posts: 10,545
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: OneFlyCowboy
I just baked my seat in the oven and got the plastic nice in warm the stretched my Ceet Gripper Seat cover over it and Shot staples in with a regular ol hand stapler [img]i/expressions/face-icon-small-wink.gif[/img] worked good for me.
Originally posted by: Red400EXRod
My electric gun wouldn't even push 1/4" staples halfway in. Plus the material was really thick and I was worried about getting it tight enough to take out all the wrinkles.
I have installed gripper seat covers before but that material is thinner, it was also on my Blaster (see I do have a Yamaha).
I have a gripper to put on Cindys 250ex. I'll see if my staple gun will work on that, if not I mat take it back to Trimcraft again.
Originally posted by: maggiesboy
Don't get your deals all twisted up yet! That takes a "killer" staple gun huh Rod? Small air, and 80% of electric guns will not do the job.
Don't get your deals all twisted up yet! That takes a "killer" staple gun huh Rod? Small air, and 80% of electric guns will not do the job.
I have installed gripper seat covers before but that material is thinner, it was also on my Blaster (see I do have a Yamaha).
I have a gripper to put on Cindys 250ex. I'll see if my staple gun will work on that, if not I mat take it back to Trimcraft again.
a cowboy and his lectric campfire.....
Jan 20, 2005 | 02:04 PM
Elite Pro Rider
testing testing 123.
testing testing 123.
Joined: May 2002
Posts: 5,465
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Hey Cowboy I bet the oven smelled wonderful after that LOL [img]i/expressions/face-icon-small-wink.gif[/img] thats ok we put our carriers in ours when we do the bearings [img]i/expressions/face-icon-small-shocked.gif[/img] now what kind of woman would let you do THAT!! [img]i/expressions/face-icon-small-happy.gif[/img] I'm looking to get a CHEAP or free electric stove cuz I would like to start powder coating little stuffs we used to have 3 ovens but hauled them all off, guess I should of kept one!!
MB I'll let you know, it probably won't be a "planned" thing per say, but we'll just call you guys & say lets go eat [img]i/expressions/face-icon-small-happy.gif[/img] yes it will be after 5pm [img]i/expressions/face-icon-small-wink.gif[/img]
MB I'll let you know, it probably won't be a "planned" thing per say, but we'll just call you guys & say lets go eat [img]i/expressions/face-icon-small-happy.gif[/img] yes it will be after 5pm [img]i/expressions/face-icon-small-wink.gif[/img]
Jan 20, 2005 | 02:17 PM
Super Quad Patrol
Smokes meat all the time!
Smokes meat all the time!
Joined: Sep 2002
Posts: 12,479
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
[quote]
Originally posted by: maggiesboy
Julie and I are 100%
what time???? Is the staging area easy to find,,,,,not too confusing?
Originally posted by: maggiesboy
Originally posted by: Red400EXRod
I just don't want to speak for anyone that has not told me directly, although, I don't think Happa will turn down a "test session " for his new rain gear.
Originally posted by: maggiesboy
I believe Happa and Skllz are also attending.
Originally posted by: maggiesboy
So who is going up to the Valley Of Death this weekend for the ride? Lets have a roll call.......
Maggiesboy=in
Bbbtats=in
Dirtmomma=in
Hubby Ron=in
Boy Wonder=in
Everett=in
Brian=in
Jacob=in
Dazeys=in
dcrew=in
dcrew=in
dcrew=in
dcrew=in
Warriorqueen=in
So who is going up to the Valley Of Death this weekend for the ride? Lets have a roll call.......
Maggiesboy=in
Bbbtats=in
Dirtmomma=in
Hubby Ron=in
Boy Wonder=in
Everett=in
Brian=in
Jacob=in
Dazeys=in
dcrew=in
dcrew=in
dcrew=in
dcrew=in
Warriorqueen=in
Julie and I are 100%
what time???? Is the staging area easy to find,,,,,not too confusing?
Jan 20, 2005 | 02:22 PM
Monkey Rider
Afro-Engineer
FREE AND NOW are the best
Afro-Engineer
FREE AND NOW are the best
Joined: Aug 2004
Posts: 38,396
Likes: 0
From: The Asphalt Jungle
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Shhesh aint like ya bake it at 350!!! my god. between 150 - 180 is safe for most materials. and it doesnt smell. Like on them new fendandled headlights on them subaru's. you take em out the car bake em for 15 minutes in the over pull the lens off and take out the yeller reflectors and press the lens back on and bake it agin. Ovens aint just fer cookin!!! [img]i/expressions/face-icon-small-happy.gif[/img]
Jan 20, 2005 | 02:32 PM
Monkey Rider
Afro-Engineer
FREE AND NOW are the best
Afro-Engineer
FREE AND NOW are the best
Joined: Aug 2004
Posts: 38,396
Likes: 0
From: The Asphalt Jungle
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: maggiesboy
a cowboy and his lectric campfire.....
a cowboy and his lectric campfire.....