Old PSAR thread - please see the new one
Sep 30, 2005 | 01:01 AM
Pro Rider
Joined: Jun 2005
Posts: 1,805
Likes: 0
From: The Great Northwest
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: HappaRap
I used an extension from my little drive socket set, works great. The chain hasen't stretched one bit, I have a gold atv chain that has two rides on it, gonna cut it to fit, slap on the master link and call it good. Have you taken your airbox out yet for that adapter? It takes alittle figuring to get that airbox out, much easier than the 660.
Originally posted by: RaptorRandy27
Hap, just use a phillips screw driver, stick it in the hole and roll the bike forward the thing moves real easy. Remember to loosen the pinch bolts[img]i/expressions/face-icon-small-wink.gif[/img]
Your, chain must not have stretched yet, mine loosens up enough to just pick it up off the sprocket when the skid plates removed.
Originally posted by: HappaRap Dumb, Dumb, Dumb
You need a steel rod, 8mm diameter, 10cm long in order to adjust the chain on the 700R.
You need a steel rod, 8mm diameter, 10cm long in order to adjust the chain on the 700R.
Your, chain must not have stretched yet, mine loosens up enough to just pick it up off the sprocket when the skid plates removed.
The only thing that I found a little irratating on the air box mod was getting the right side bolt that goes into the side of the airbox started when I was puttin every thing back together. All I have left to do is change the oil and she's ready for the Dunes[img]i/expressions/face-icon-small-cool.gif[/img]
Sep 30, 2005 | 01:14 AM
"One Wheel Short"
slow day around the orafice I see!
slow day around the orafice I see!
Joined: Jun 2004
Posts: 10,545
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Just for more entertainment......takin it to a chicken farmer
and do you like the show "PIMP MY RIDE" Now you can....pimp your own ride
and do you like the show "PIMP MY RIDE" Now you can....pimp your own ride
Sep 30, 2005 | 01:29 AM
Super Quad Patrol
Smokes meat all the time!
Smokes meat all the time!
Joined: Sep 2002
Posts: 12,479
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: TractorPacker
I just got 1789 in the cat launch.
I just got 1789 in the cat launch.
Sep 30, 2005 | 03:45 AM
Pro Rider
Joined: Nov 2003
Posts: 726
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Looking forward to the ride mid month. I want to re-shoot the group shot again. I want to set the time to get the shot for sunset and we will re-shoot it near where we did the last shot if you all agree.
I dont know what happened to the last shot I took, but I dont control what goes into the mag. Things move at a snails pace sometimes, sometimes they come out as scheduled. I want to get a more picturesque shot with a bit of Pac NW Color in it. Wish there were some leaves turned color already. Ill advise of the time on Saturday when we get there!
3 more days til I know about my new Suzuki Quadracer 450! Woo hooo!
Ken[img]i/expressions/face-icon-small-happy.gif[/img]
I dont know what happened to the last shot I took, but I dont control what goes into the mag. Things move at a snails pace sometimes, sometimes they come out as scheduled. I want to get a more picturesque shot with a bit of Pac NW Color in it. Wish there were some leaves turned color already. Ill advise of the time on Saturday when we get there!
3 more days til I know about my new Suzuki Quadracer 450! Woo hooo!
Ken[img]i/expressions/face-icon-small-happy.gif[/img]
Sep 30, 2005 | 07:51 AM
Elite Pro Rider
Lazy Boy Rider!
Lazy Boy Rider!
Joined: Jun 2003
Posts: 15,700
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: RaptorRandy27 The only thing that I found a little irratating on the air box mod was getting the right side bolt that goes into the side of the airbox started when I was puttin every thing back together.
On my 660 I put a filter on that tube and completely did away with the airbox, it can be done with this airbox, just gotta figure how to mount the CDI to the frame. I think that might be a project when the full system goes on [img]i/expressions/face-icon-small-wink.gif[/img]
Sep 30, 2005 | 09:38 AM
Pirate Biker
Limping Rider!
Limping Rider!
Joined: May 2003
Posts: 61,672
Likes: 55
From: Snohomish, Washington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: HappaRap
I changed from a 38 to a 40, trying to get the 40 on without breaking the chain, I got it as far as getting it on both sprockets but I need a tad bit more length to put the bolts through the holes and even then it's just too tight.
Originally posted by: Red400EXRod Did you get you chain adjusted? I thought Yamaha simplified their chain adjuster. All you need on a Honda is one allen wrench, and it's supplied with the quad!
Sep 30, 2005 | 09:45 AM
Pirate Biker
Limping Rider!
Limping Rider!
Joined: May 2003
Posts: 61,672
Likes: 55
From: Snohomish, Washington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Good mornin' PSAR
Everyone's tinkering with their quads, guess I'll have the slow one of the group.
Oh, I forgot about Nick![img]i/expressions/face-icon-small-wink.gif[/img]
Everyone's tinkering with their quads, guess I'll have the slow one of the group.
Oh, I forgot about Nick![img]i/expressions/face-icon-small-wink.gif[/img]
Sep 30, 2005 | 09:47 AM
Pirate Biker
Limping Rider!
Limping Rider!
Joined: May 2003
Posts: 61,672
Likes: 55
From: Snohomish, Washington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Still haven't heard whether Nate has leave in Oct. or not, so we still don't know if we'll make Florence[img]i/expressions/face-icon-small-sad.gif[/img]