Old PSAR thread - please see the new one
Sep 4, 2006 | 02:38 PM
Elite Pro Rider
Joined: Mar 2006
Posts: 5,749
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: LdyJay
Saw Rancher's question a few days ago.
It's a diameter thing. I believe the Clark fuel tanks are the aftermarker higher capacity ones, but not sure. I just searched my machine profile and they sent me the correct ones for both my quads. If all else fails, RMATV has great customer service. If you give them a call they can tell you for sure.
Originally posted by: WildTurkey151
Does anyone have some usable Blas Terd parts they could part with fairly cheaply??? Trying to fix up my brothers quad for him and have it finished before he finishes AIT. Or if you could point me in the right direction for cheap parts.
Thanks guys.
What is the diffence b/w clark and IMS gas tanks besides the name???
Does anyone have some usable Blas Terd parts they could part with fairly cheaply??? Trying to fix up my brothers quad for him and have it finished before he finishes AIT. Or if you could point me in the right direction for cheap parts.
Thanks guys.
What is the diffence b/w clark and IMS gas tanks besides the name???
It's a diameter thing. I believe the Clark fuel tanks are the aftermarker higher capacity ones, but not sure. I just searched my machine profile and they sent me the correct ones for both my quads. If all else fails, RMATV has great customer service. If you give them a call they can tell you for sure.
Sep 4, 2006 | 02:40 PM
Elite Pro Rider
Joined: Mar 2006
Posts: 5,749
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Alright Wild, I am off to check out the range and I will give you a call when I get back. Angie and I were going to take Rico to the lake too if you and pops or the midget want to go.
Sep 4, 2006 | 03:18 PM
Extreme Pro Rider
Preach it Brother!!! ;)
Preach it Brother!!! ;)
Joined: Mar 2005
Posts: 2,993
Likes: 0
From: Warshington
Sep 4, 2006 | 07:58 PM
Pirate Biker
Limping Rider!
Limping Rider!
Joined: May 2003
Posts: 61,712
Likes: 55
From: Snohomish, Washington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: WildTurkey151
Does anyone have some usable Blas Terd parts they could part with fairly cheaply??? Trying to fix up my brothers quad for him and have it finished before he finishes AIT. Or if you could point me in the right direction for cheap parts.
Thanks guys.
What is the diffence b/w clarck and IMS gas tanks besides the name???
Does anyone have some usable Blas Terd parts they could part with fairly cheaply??? Trying to fix up my brothers quad for him and have it finished before he finishes AIT. Or if you could point me in the right direction for cheap parts.
Thanks guys.
What is the diffence b/w clarck and IMS gas tanks besides the name???
I picked up the FMF Fatty Gold pipe and Powercore silencer off of eBay.
Also look at getting Boysen reeds. I also put on a 30mm flat slide carb I got from Trengaracing.com. It wasn't cheap, though. I also had it bored .040 over. It really is quite peppy now.
Also check out blasterzone.com
Sep 4, 2006 | 08:37 PM
Elite Pro Rider
Lazy Boy Rider!
Lazy Boy Rider!
Joined: Jun 2003
Posts: 15,700
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: Red400EXRod CRIKEY! Steve Irwin killed by a sting ray. I always figured a croc would get him. That is sad.
Sep 4, 2006 | 08:44 PM
Elite Pro Rider
Lazy Boy Rider!
Lazy Boy Rider!
Joined: Jun 2003
Posts: 15,700
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: Red400EXRod I need to finish sorting all the crap I took out of my shed yesterday.
Sep 4, 2006 | 09:10 PM
"One Wheel Short"
slow day around the orafice I see!
slow day around the orafice I see!
Joined: Jun 2004
Posts: 10,545
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
well, we (TP, Fast Eddie, Jen and I) made it back from Darrington in one piece. The trike ran really good. There is a few minor things that need some attention like footpegs and shift lever. All in all, I'm very happy with the trike purchase.
TP has a good story about a crash to tell, and it has nothing to do with a phat guy on a trike [img]i/expressions/face-icon-small-happy.gif[/img]
I forgot how hard those things are to ride, but they sure are fun [img]i/expressions/face-icon-small-happy.gif[/img]
TP has a good story about a crash to tell, and it has nothing to do with a phat guy on a trike [img]i/expressions/face-icon-small-happy.gif[/img]
I forgot how hard those things are to ride, but they sure are fun [img]i/expressions/face-icon-small-happy.gif[/img]
Sep 4, 2006 | 09:15 PM
Elite Pro Rider
Joined: Mar 2006
Posts: 5,749
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: LdyJay
OK, so who's training for This event?
OK, so who's training for This event?
Sep 4, 2006 | 09:17 PM
Elite Pro Rider
Joined: Mar 2006
Posts: 5,749
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: HappaRap
Wish I had a shed to put crap in, guess that'll be my first spring project [img]i/expressions/face-icon-small-wink.gif[/img]
Originally posted by: Red400EXRod I need to finish sorting all the crap I took out of my shed yesterday.
Sep 4, 2006 | 09:24 PM
Extreme Pro Rider
Preach it Brother!!! ;)
Preach it Brother!!! ;)
Joined: Mar 2005
Posts: 2,993
Likes: 0
From: Warshington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: RancherATCrazy
I think your link may have changed since your post. If not, what exactly are we supposed to be training for???
Originally posted by: LdyJay
OK, so who's training for This event?
OK, so who's training for This event?
Try it now.