39 FCR's
#12
At the cost of 39FCR's , I think I would look at EFI
I'm still shoving it through a drilled/modified alky HSR48 single, but will probably run dual 40 Lectrons on my next build, way cheaper than any FCR and the performance is up there with the rest of 'um
I'm still shoving it through a drilled/modified alky HSR48 single, but will probably run dual 40 Lectrons on my next build, way cheaper than any FCR and the performance is up there with the rest of 'um
#16
You need to couple the throttle together, that would be hard to do with two sepperate carbs. If you get a set off of a street bike you'll have most of what you need for two set ups.[img]i/expressions/face-icon-small-wink.gif[/img]
#17
Originally posted by: SLIM660
I dont know who would have them in stock but give Freddy at Sanfords ATV a call at 252-438-2730 and I'm sure he can get you some or find out who has them. Or give Curits Sparks a call and he can probably help. Freddy's hours are from 10:00pm to 7:00pm Mon. Through Friday and 10:00pm to 3:00pm on Saturdays. Hope this helps. Slim
I dont know who would have them in stock but give Freddy at Sanfords ATV a call at 252-438-2730 and I'm sure he can get you some or find out who has them. Or give Curits Sparks a call and he can probably help. Freddy's hours are from 10:00pm to 7:00pm Mon. Through Friday and 10:00pm to 3:00pm on Saturdays. Hope this helps. Slim
#19
Zombie, Thanks for the help on a connection on who carrys them. I'm not exactly ready to spend 1g on carbs right now. I was hoping to be able to possibly buy a couple seperates and parts a little at a time to lessen the shock. I'm realizing that might be alot of head ache in the long run![img]i/expressions/face-icon-small-sad.gif[/img]
I noticed on Sudco's web site they use UPP carb boots for 35 and 39mm carbs , If these work why are all the 39mm's I've seen on a custom built mainifold? Craycraft, Kenz built motors all have custon manifolds from what I've seen . Robertson's may also I'm not sure.[img]i/expressions/face-icon-small-confused.gif[/img]
I noticed on Sudco's web site they use UPP carb boots for 35 and 39mm carbs , If these work why are all the 39mm's I've seen on a custom built mainifold? Craycraft, Kenz built motors all have custon manifolds from what I've seen . Robertson's may also I'm not sure.[img]i/expressions/face-icon-small-confused.gif[/img]


