i wanna know what some realy good mods are for my blaster for both drag racing and mx racing?







Yamaha Blaster
fmf pipe/silencer
boyesen reeds
head shaved .015

 

14/40 gearing, Vitos piston, Hot Rods crank, 30mm flatside carb, UNI filter, no airbox lid, Dynojet kit, Toomey B-1 kit, Rappy handle bars, good port job.

 

anyone else have some ideas?? those sound good, just want more opinions

 

for mx racing...get sum 18" holeshots for the back, and 19" holeshots for the front, mite wanna get it bored over...if u look at the mods on my blaster at the bottom...thats easily over $1000...by the way its for sale so i can get my Z!!

 

for mx raceing go with the fmf fatty silencer v fource reeds and get a 250r boar kit

 

what are the three best performance mods avalibale for a blaster but under 1500 dollars

 

i live in syracuse new york, and if there is anyone on this thread who wants some mods for pretty cheap there is a place here in new york that will port heads, pipe, bore, re-jet and several other little small things for about 500 bucks. so if you live in new york that would be a good place to go

 

Well you could always get a 295 big bore, port it, mill the head, get a 36mm carb, big bore pipe, v-force reed valve, open air filter, and then if that isnt enough STROKE IT......[img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]

 

just go check out Trenga Racing's website because they are specialists for Blasters.