I am trying to rejet my cars on my Banshee. I did the mains but when trying to get my needle adjusted get it all taken apart then when try to take those last two screws out the one will not turn, trying to strip out. What should i do? Is there any other way to get clips adjusted w/o taking themscrews out? They use the cheapest bolts and screws on this bike. Thanks all

 

all i can suggest is to try and tap on the end of the screwdriver with a hammer. there is no other way to adjust your clip position. while you have the screw out, go to an industrial nut and bolt store and see if they can hook you up with allen head bolts. good luck