Yamaha Discussions about Yamaha ATVs.

any raptor 300' drag times?

Thread Tools
 
Search this Thread
 
Old Aug 31, 2003 | 12:06 PM
  #1  
witti's Avatar
Thread Starter
|
Pro Rider
Joined: May 2003
Posts: 730
Likes: 0
Default any raptor 300' drag times?

Wanted to know what a stock or piped raptor runs in 300'.
 
Reply
Old Aug 31, 2003 | 12:49 PM
  #2  
garyc660R's Avatar
Elite Pro Rider
Joined: Jan 2000
Posts: 6,996
Likes: 0
Default any raptor 300' drag times?

Tracks vary in et because of different conditions and elevations....but I will throw some #'s out from my personal experience this past Friday at a 300' track.
Stock appearing Raptor, Predator, DS = 6.60-80 Z400 7.00-7.20 400ex payed no attention
Piped appearing Raptor, C-dales, Predators (no piped DS available that I noticed) = 6.20-6.5
I ran high 5's on my cammed and higher compression Raptor with 22" tall trail tires. I feel a little was lost due too a gearing change I recently made....but thats the first time too that track...so who knows? I figure there was 80 sport quads there for the test and tune session. It seems most of the riders were under 160 pounds.
Don't believe 90% of the 300' ET's people throw around in these forums.....they are scared too death someone else is quicker.
 
Reply
Old Aug 31, 2003 | 12:52 PM
  #3  
garyc660R's Avatar
Elite Pro Rider
Joined: Jan 2000
Posts: 6,996
Likes: 0
Default any raptor 300' drag times?

Almost forgot.....piped 450's were running about heads up with piped Raptors, C-dales, and Predators. Again, this is first hand knowledge.
 
Reply
Old Aug 31, 2003 | 01:04 PM
  #4  
cueball89's Avatar
Pro Rider
Joined: Apr 2002
Posts: 327
Likes: 0
Default any raptor 300' drag times?

A stock rapptor only runs 6.60-.80?!?!?!?!?![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] Dont mean to start anything but my P650 will hang with it.[img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-tongue.gif[/img][img]i/expressions/face-icon-small-frown.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img]
 
Reply
Old Aug 31, 2003 | 10:26 PM
  #5  
howardstern's Avatar
Range Rover
Joined: Apr 2003
Posts: 190
Likes: 0
Default any raptor 300' drag times?

4.9 off the bottle.. no runs just put it on!!!
 
Reply
Old Sep 1, 2003 | 12:39 AM
  #6  
THEMOOSE's Avatar
Pro Rider
Joined: Jan 2002
Posts: 2,272
Likes: 0
Default any raptor 300' drag times?

Piped Raptor (full Sparks X6), Dynojets, trimmed snorkle (lid on), 8 paddle 22 X 11 X 10 Extreme haulers, Front solid struts, narrowed rear end, rear suspension tied down solid & wheelie bar.
Best time 5.89 with cool air & very low humiditys, 6.20 with 90 degree + temps & 70%-80% humiditys
Approx 1200' alt, level groomed sand track.

Times will vary as Gary660R said, % of dirt & sand in track, moisture content of track, temp & humidity & driver skill & weight, you can lose a lot of time if you can't launch right so 6'80 isn't out of line for a stock Raptor that wheelies out of the start.

Some tracks are built down hill to give false times (the Texas sand drags track drops 30' from start to finish!!) so there are a lot of variables in the times you might hear.
 
Reply
Old Sep 1, 2003 | 02:17 PM
  #7  
garyc660R's Avatar
Elite Pro Rider
Joined: Jan 2000
Posts: 6,996
Likes: 0
Default any raptor 300' drag times?

Originally posted by: cueball89
A stock rapptor only runs 6.60-.80?!?!?!?!?![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] Dont mean to start anything but my P650 will hang with it.[img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-tongue.gif[/img][img]i/expressions/face-icon-small-frown.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img]
Remember, different tracks will yield sometimes very different times....I posted nothing concerning a P650 because they basically run with a 400ex in 300'. You can throw mild 250r's in with the piped crowd too....but mild 250r's are scarse. All of the above atv's I posted yould easily go too another track and possibly pick up 3/10's depending on track and conditions. BTW, I did forget too mention that the starting line was a 6-8" pit that everyone had too negotiate pulling out...so that did not help anyone...[img]i/expressions/face-icon-small-smile.gif[/img].
 
Reply
Old Sep 1, 2003 | 02:28 PM
  #8  
garyc660R's Avatar
Elite Pro Rider
Joined: Jan 2000
Posts: 6,996
Likes: 0
Default any raptor 300' drag times?

Originally posted by: howardstern
4.9 off the bottle.. no runs just put it on!!!
I raced a KX500 that put about 13-15 lengths on me and ran a 4.8....me running a 5.7 on the very humid evening.....SO, I could believe a hard running, properly, professionally built Raptor doing that. Around a 5.0 is QUICK for a 4 stroke thumper with the OE engine. Hard running 2 strokes that are slammed with the bar are just getting started at that et though. If I did not trail ride and got serious racing, a wheelie bar would help....the start seems most important. Later gentlemen.
 
Reply
Old Sep 1, 2003 | 06:19 PM
  #9  
bad350twin's Avatar
Pro Rider
Joined: Apr 2003
Posts: 891
Likes: 0
Default any raptor 300' drag times?

the only track around me is a concrete drag strip (1/8 mile) and they also give you a 330ft time
 
Reply
Old Sep 3, 2003 | 08:47 PM
  #10  
SLIM660's Avatar
Pro Rider
Joined: Apr 2003
Posts: 517
Likes: 0
Default any raptor 300' drag times?

4.8's with a friends 727 off just race fuel. Quick bike!! Slim
 
Reply



All times are GMT -5. The time now is 06:05 PM.