Raptor Problems
#1
09-03-2003, 02:23 PM
Join Date: Jan 2000
Posts: 6,996
Likes: 0
Received 0 Likes
on
0 Posts
Raptor Problems
Doh! After checking my oil level I did'nt get the oil level guage (dip stick) back in correct. Long story short, it blew out when I started riding and had no luck finding it. Of course it's a special order item and could be forever before it's in. Can someone do me a HUGE favor and measure theirs from the bottom of the threads too the "full" mark so I can accurately measure oil level? I guess I will find something that will screw into the hole and seal it until my new guage comes in. I would be really appreciative. Thanks!
Gary
Gary
#3
09-03-2003, 02:53 PM
RIP Dear Friend
Join Date: Jul 2001
Posts: 22,930
Likes: 0
Received 0 Likes
on
0 Posts
Raptor Problems
Gary by the time out got out to the 01 Virgin's hiding place I forgot what you had written because I took too many side trips and then hit on the out house and finally got to the dip stick for a look.
Here is how I got my measurements. Where the black O/ring sits on the top the the oil tank to the full mark on the dip stick is:
2 and 1/8 inches.
ChetRacer[img]i/expressions/face-icon-small-cool.gif[/img]
Here is how I got my measurements. Where the black O/ring sits on the top the the oil tank to the full mark on the dip stick is:
2 and 1/8 inches.
ChetRacer[img]i/expressions/face-icon-small-cool.gif[/img]
#4
09-03-2003, 03:30 PM
Join Date: Jan 2000
Posts: 6,996
Likes: 0
Received 0 Likes
on
0 Posts
Raptor Problems
Originally posted by: RAPTORYFM660r
Gary by the time out got out to the 01 Virgin's hiding place I forgot what you had written because I took too many side trips and then hit on the out house and finally got to the dip stick for a look.Here is how I got my measurements. Where the black O/ring sits on the top the the oil tank to the full mark on the dip stick is:2 and 1/8 inches.ChetRacer[img]i/expressions/face-icon-small-cool.gif[/img]
Gary by the time out got out to the 01 Virgin's hiding place I forgot what you had written because I took too many side trips and then hit on the out house and finally got to the dip stick for a look.Here is how I got my measurements. Where the black O/ring sits on the top the the oil tank to the full mark on the dip stick is:2 and 1/8 inches.ChetRacer[img]i/expressions/face-icon-small-cool.gif[/img]
Pike, I was gonna use the manual for a rough idea, and fine tune my oil level with the proper distance into the oil reservoir.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)