Need Yall's Opinion
#1
Need Yall's Opinion
I have a 96 banshee... I have a cool head and domes in there right now. I have busted/torn whatever 2 freaking o-rings in the past couple weeks. Yes they were lubed and what not. My friend is telling me go back stock heads b/c they dont have rings and it wont mess up as much, and he said i sill wont loose speed.. What do you think I should do?
#2
#4
Need Yall's Opinion
Loosing power depends on if you had your stock shaved .015 or .030. What cc domes are you using?
I ran a cool head with 18cc domes and never had any problems and running race fuel. Check the top of the jugs and make sure they are not worped. Put a straight edge across both jugs while they are still bolted to your upper case and see of you can see light.
I ran a cool head with 18cc domes and never had any problems and running race fuel. Check the top of the jugs and make sure they are not worped. Put a straight edge across both jugs while they are still bolted to your upper case and see of you can see light.
#5
Thread
Thread Starter
Forum
Replies
Last Post
braap123
General RUV / UTV Discussion
0
09-07-2015 12:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)