On an otherwise stock Banshee engine, I highly recommend Paul Turner Hi-Revs. Ask pudjumper or thebom how well they work.

Daren

 

between those 2 the toomey for sure

 

I have no experience with the Trinity pipes. So I can't comment on their performance.

Toomeys sound great. And they are good looking pipes that seemed to work well on my friends ported, big carbs, etc. Banshee.

But if you want the most performance out of a stock Banshee engine, I'm telling you that the Paul Turner Hi-Revs are one of the best. They were just as fast as the CPI in-frames on my Trinity ported 404cc.

I ran them when my Banshee was stock and now they are on a friends Banshee. People have a hard time believing that his Banshee is stock. And with these pipes you don't need to spend the extra money on a DynoJet kit. Duncan Racing will tell you exactly what you need.

I do have a complaint about the Paul Turners though. You have to modify the coil location and the pipes are very close to the water line that runs from the radiator to the water pump.

What I can tell you is pudjumper's son has a Banshee with the CPIs and he knows exactly how it compares to my friends banshee with the Paul Turners.

Just trying to help.

Daren

 

I have toomeys, and all i have to say is GET THEM, they give a lot of power to a banshee.

 

i would go with toomey, because lots of people have it, and thiers really never any problems, but Trinity makes excellent banshees, their pipes are probably the same power as the toomeys, what ever is cheaper.