Rebuild Time, Need Some Advice-
#1
Rebuild Time, Need Some Advice-
Well its winter here and I think Its time to rebuild the blaster and rework some things on the warrior-
The blaster has been developing some piston slap and the compression is getting low, so i figure its time to punch it out and maybe do a little modding to it- my questions are-
1.Who makes the best piston for the most HP gain-
2.Who makes the best set of reeds-
3.would anybody recomend getting it ported-
4. Are there any fairly inexpensive mods i could do while i have it torn apart-
Well the Warrior Was rebuilt 2 summers ago but Was abused while it was stolen, I got it back and now want to rebuild it and also i wanna little more umph outa it-
Im planin on boring to about .20 over, I wanna add a high compression piston, who makes the best?
I was just thinking of buying the alba cam and piston kit with the ti valvesprings, i was also wondering if stainless valves would be worth the buy, and all- does anybody have this setup and what do u think of it? I was also considering a bigger carb like the lectron from alba but havnt heard much about it, any opions or advice would be great-
Thanks
Ryan-
The blaster has been developing some piston slap and the compression is getting low, so i figure its time to punch it out and maybe do a little modding to it- my questions are-
1.Who makes the best piston for the most HP gain-
2.Who makes the best set of reeds-
3.would anybody recomend getting it ported-
4. Are there any fairly inexpensive mods i could do while i have it torn apart-
Well the Warrior Was rebuilt 2 summers ago but Was abused while it was stolen, I got it back and now want to rebuild it and also i wanna little more umph outa it-
Im planin on boring to about .20 over, I wanna add a high compression piston, who makes the best?
I was just thinking of buying the alba cam and piston kit with the ti valvesprings, i was also wondering if stainless valves would be worth the buy, and all- does anybody have this setup and what do u think of it? I was also considering a bigger carb like the lectron from alba but havnt heard much about it, any opions or advice would be great-
Thanks
Ryan-
#2
Rebuild Time, Need Some Advice-
when i rebuilt my blaster i used a wiseco piston because it as the chapest but i would recommend a JE piston, as for reeds, i went with boysen, porting is a great idea, i heard it adds like an 8 hp gain, you could also get the head shaved, that increases compression
Thread
Thread Starter
Forum
Replies
Last Post
ranvette
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
07-04-2015 06:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)