I looking for some tips on some mods for my 03 Raptor mostly ridin in Glamis. What type of pipe and jetting is good and some riders have told me to get a different sprocket any other tips. ANY ADVICE APPRECIATED

 

You can get a Alba Stage Three Kit. That includes K&N Pro Flow kit, full system, and jets.

You could also port and polish your rappy and get some good power gains.

You can change the piston to a 10-1 or 11-1 and get a stage one hot cam and not change the valve springs, or you can get stage two cam and change the valve springs.

The alba system is $600 shipping and all.

Port and polish is around $350.

Piston and Cam is around $400.

So there are several mods that will get you a lot of power. Get them all and your looking around 55hp.

 

Stay away from FMF pipes for the Raptor though.

 

What paddles do you run? I'd highly suggest 8 paddle haulers for a stock or near stock machine. The right tire can make a huge difference. I'd also put dune tracker (ribbed) tires on the front and the widest offset wheels you can. That's the first thing to worry about on a duner. Next go with the 12T countershaft sprocket and you'll be able to climb pretty much anything you point it at. I'd also consider a swingarm extension, mine's a 4.5" JTM and the added stability makes hillclimbs much less intimidating.

 

my raptor is pretty stock except for the ITP sand stars on douglas rims