ok guys, i'm lookin at banshee mods. i don't race my banshee, but i would like the power. i just want the basic mods. exhaust and intake, and anything else that produces alot of power and is cheap. i ride my banshee on trails. maybe that will give yall an idea of wut i need. thanks for the help.

on second thought, give me anything i will need for trail riding. tires, sprockets, etc. thanks

 

"A lot of power". By power do you mean, top end HP or low end torque? Basic mods, such as exhaust and intake will definitely give you more HP.

However, you say you ride trails. Therefore, let me suggest that you don't want more HP. I have a Warrior and a Banshee, and stock the Banshee was a challenge on the trails (compared to the Warrior). Do the basic mods, get more top end, lose some bottom end, and it's even harder to handle on the trails. For trail riding, you need to get back some of the bottom end. Unfortunately, very few things can be done cheaply. Lower gearing will definitely help. I have a 12 tooth, some ppl say that's too much. A 2 to 1 carb setup is supposed to help w/ low and mid range, but is far from cheap.

Colby

 

The funny thing is Pipes are just about the most expensive mod you can get other than aftermarket cylinders.

 

for real. but if u look into pipes look at bottom end pipes like fmf gnarlys. do you really have a banshee cuz one of your threads siad you were lookin for a used one? or did you already get one?