Anyone know max torque for stock rappy? I'm guessing 30 ftlb..... (Assuming 38 hp stock @ 6600)

Torque = 5,252 x hp / Rpm

G.

 

38hp is pushing the top. Most bikes run around 34-36hp.

Torque is 37ft/lb at 5500 rpm.

EDIT: As posted in another thread on this forum. I havent found the stock raptor dyno sheet, but I'll keep looking. This does seem a little high.

 

I would say anywhere around 29-31, give or take, depenging on what type of tires are on it.

 

best reading would be on stock tires. Most dynos dont bother to change over the tires, so they should be as close as dynos get. Which, btw, isnt very close to the production numbers as a whole.

 

I think my BUILT banshee only turned 33. Maybe I need a 4-stroke to pull my big a$$ around.[img]i/expressions/face-icon-small-smile.gif[/img]