rz500 conversion
#1
rz500 conversion
ive seen many people speak of a rz350 conversions, in which they take the powervalve cylinders off of the rz350 and put them on the banshee bottom end without any modifications. my question is has any one mounted the rz500 motor in a banshee frame? and if so were there any modifications needed?
#2
rz500 conversion
since the rz500 is actually a 50 degree v-4, it would take quite a bit of fabricating to make it work. there is no way in hell you could use anything from a stock banshee motor with the rz500 transplant. You would have to make some motor mounts and use the rz500 tranny which isn't very off road friendly. It will do well over 50 mph in first gear. Wiring the electrical system would be a b!tch to do too. good luck to anyone that tries this. I have seen one put in a quadzilla though, so it can be done.
heres a link to the quadzilla rz500 conversion
heres a link to the quadzilla rz500 conversion
#3
#4
rz500 conversion
Originally posted by: AnimalMother85
Then again, some may say its foolish to spend 7 g's in a fourwheeler.
Then again, some may say its foolish to spend 7 g's in a fourwheeler.
Thread
Thread Starter
Forum
Replies
Last Post
KingDingalling
Introduce Yourself
3
07-29-2015 10:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)