If your working on your hub nuts (to remove your wheel hubs, you'll want to use an impact. They can get pretty tight. I've had to use a bar and put my foot on the rear break with a breaker bar on the bar too. Ended up on the floor when it cam loose [img]i/expressions/face-icon-small-blush.gif[/img]

 

I just changed the bearings in the 02 raptor and I had a BI$CH of a time trying to get the Axle nut off. I purched the Motion Pro wrench set and got the breaker bar from Lowes. I layed on the bike with my foot on the rear break and pushed down. I tried the pipe wrench with a torch and the same thing was happing just chewed up the nut. And yes I removed both allen screws holding the nut.

Good luck.