i just got back from my friends and i was jumping off this hill going up to his barn, i finally cleared it but landed to hard against the handle bars, now i bent the one on the left and i cant bend it back!! any ideas??!??!

 

Bent the handle bars? Buy new ones.

 

i would...but wouldnt it be a pain in the @$$?

 

Why would it be a pain to buy new bars?

Its more of a pain to try to fix the old ones, I know, I've tried with 2 different sets. If you really dont want to spend the money, get a torch, a bench vice, and a long piece of steel tubing. If you cant figure out what to do with that stuff, you had better just buy new. They will still never be the same though.

 

yeah just buy new bars. they are only like 80 bucks and they are alot stronger than the stockers

 

Just get a torch and heat it up where it needs to be bent then pull really hard but slowly and u can get them back to normal i have done it 10 12 times [img]i/expressions/face-icon-small-smile.gif[/img] i always find a way to bend them wether it be by rolling or other means it happens.

 

Buy a new one you will get better results when you ride. And save you from experiencing the same problem again.

 

we got a torch and my dad is pretty experienced with it...but i talked to him and were gonna get aftermarket bars....were leaning towards the renthals on the royal distributing catalogue, can anyone tell me what the renthals are like?

 

bump....please? anyone?

 

renthal is good but tag is better in my opinion. if your gonna get either thoguh get the fatty bars.