Hey all, I need some help deciding where to start on my Raptor jetting. Here is what I have: Pro Design air filter adapter w/ foam filter( right now, K& N on the way). Full Yoshimura Comp exhaust. I have the GYTR jet kit. I have already got the carbs off and the new needles in. The questions I have are: 1. What size mains should I try first? I have looked at lots of posts and everybody seems different. 2. Should I put the 25 pilot jet in or stick with the 22.5's. I would appreciate any posts on this. Thanks.

 

follow the instructions

is the lid on or off?

what elevation?

150/155 might be a good starting point with clips on 3rd groove

 

The airbox lid is on. Elevation is 600ft or so above. Should I put the 25 pilot in? BTW, thanks for replying. There are so many posts on this already.

 

id start around 165..